View previous topic :: View next topic |
Author |
Message |
augustocentarti Newbie
Age: 35 Zodiac: Joined: 11 Jun 2017 Posts: 6 Location: ARGENTIN
|
Posted: Sun Jun 11, 2017 1:37 Post subject: INTRODUCTION AND HELP NEEDED!!!! |
|
|
Hello Everybody
I'm from Argentina and I work with a PajEvo for the national Cross Country Championship. We are upgrading all the electrical wiring and i really need the ECU pinout. Part number is MD343991. Is there any techical or workshop manual that contains that info? All that i have covers the "standard" 6G74, not the EVO.
Thank you very much in advance!!! |
|
Back to top |
|
|
Google Sponsor
|
Posted: Sun Jun 11, 2017 1:37 Post subject: Google Ads keep the POCUK free to join! |
|
|
|
|
Back to top |
|
|
hutchy ********
Age: 51 Zodiac: Joined: 03 May 2004 Posts: 5010 Location: somewhere on earth
|
Posted: Sun Jun 11, 2017 7:24 Post subject: |
|
|
there is nothing out there on the web for evo electrical stuff,so unless someone has something hid away you are going to find it really hard... |
|
Back to top |
|
|
EVO_PAJ **
Age: 46 Zodiac: Joined: 30 Aug 2011 Posts: 68 Location: Australia
|
Posted: Sun Jun 11, 2017 10:48 Post subject: |
|
|
It will be hard to find, i just had a look through my manuals, nothing in there that jumps out saying ECU pinouts im afraid. |
|
Back to top |
|
|
JOHNVOR *
Age: 52 Zodiac: Joined: 22 Aug 2016 Posts: 29 Location: GREECE
|
|
Back to top |
|
|
JOHNVOR *
Age: 52 Zodiac: Joined: 22 Aug 2016 Posts: 29 Location: GREECE
|
Posted: Tue Jun 13, 2017 11:25 Post subject: |
|
|
AND THIS |
|
Back to top |
|
|
JOHNVOR *
Age: 52 Zodiac: Joined: 22 Aug 2016 Posts: 29 Location: GREECE
|
|
Back to top |
|
|
augustocentarti Newbie
Age: 35 Zodiac: Joined: 11 Jun 2017 Posts: 6 Location: ARGENTIN
|
Posted: Wed Jun 14, 2017 3:42 Post subject: Thank you!! |
|
|
thank you very very much for the info!!!
Im already translating everything. When im done i´ll uploaded to the forum if you allow me to it.
By the Way, for your car did you eliminate the inmobilizer??
At the key antenna i have 3 wires, 1 goes to ground, 1 to a "key timer" relay-like device and the remaining one (green one) don´t know where it goes.
Are you aware if the inmobilizer can be eliminated?
Best Regards |
|
Back to top |
|
|
|